ISCO GLS - Program Start Time

GLS Sampler
2-10
Note
Sample volumes greater than 50 ml are recommended.
This volume is necessary for the bottle full detection to
work properly.
2.4.6 Program Start Time
The sampling program can be delayed to start
at a user-specified time and day. To define the
start time:
1. Use the Arrow button to select “NO DELAY
TO START” or “SET START TIME,” then
press the Enter button.
Select “NO DELAY TO START” to take the
first sample immediately after the Go but-
ton is pressed. If you select this option, pro-
gramming advances to Suction Line (section
2.4.7).
Select the “SET START TIME” to delay the
first sample until a programmed time and
date. If you select this option the GLS
advances to the “FIRST SAMPLE AT” dis-
play.
2. Enter the start hour with the number entry
buttons. The hours must be entered in a
24-hour (military time) format. For
example, 5:00 p.m. is 17:00 on a 24-hour
NO DELAY TO START
SET START TIME
FIRST SAMPLE AT:
08:00 3/17/03