ISCO GLS - GLS Sampler Operation; Starting a Sampling Program

To Next Page

To Previous Page

3-1

GLS

Sampler

Section 3 Operation

3.1 Starting a Program

You can start the GLS operation by

pressing the Go button. Pressing this

button runs the current program.

The GLS operation can also be started with the

one-button programming sequence.

This action will load the stored program

settings as the current settings and run the

program.

Generally when you start a program, the GLS

will attempt to take its first sample at the start

time - unless the sampler must wait for a

program start time or if the sampler is

inhibited.

123