iSinwheel U2 - Control and Settings Adjustment; UART Communication Protocol; Bike Mode Operations; Bike Status Area Icons

12
2. Control and settings
Power on/off control, front light on/off control, 6km/h inching control, wheel diameter setting,
top speed setting, standby auto sleep time setting, backlight brightness setting, voltage level
setting
3. UART Communication protocol: UART
Full display information within 1 sec after power on
1.
2.
3.
Multifunction display area
4.
bike mode
bike status icons and meanings：
voltage
brake prompt
motor fault
communication fault
throttle fault
controller fault
battery level
front light
ODO odometer, TRIP trip odometer, Error fault codes, WATT power, Maintain;
DST TO GO
POWER：turbo mode speed area
MAX maximum speed, AVG average speed
unit MPH, KM/H
5.The meter calculates the true speed based on the wheel diameter and signal data
6.
bike status area