T
he
reference
in
surface
TreaTmenT
International
Surface
T
echnologies
istsurface.com
18
DCM600 to 1800 - Instruction Manual
ISTblast cartridge-type dust collectors use pleated cartridge lter media made of
cellulose and polyester blend. Nano ber cartridge is also available for optional
ltration e ciency.
Cartridge media provides exceptional ltration capacity, thanks to their unique
pleat lock design that consists of a special folding process where a lock is pleated
into the media allowing the entire lter surface to be available.
This technology also keeps the pleat evenly apart and prevents them from
adhering to one another–which is particularly important if the process has any
moisture during the application–, and allows for better release during the pulse
cleaning process.
The cleaning process is controlled by the DCT1000 Dust Collector
Timer Controller which triggers a series of reverse pulses inside
the cartridge to release exceeding dust buildup on the surface.
Pleat Lock Design
* Filtration e ciency is provided for ‘‘seasoned cartridges’’ (when a dust layer is formed on its surface to
achieve optimal ltration e ciency). Performance may vary according to the application.
CARTRIDGE MEDIA
SPECIFICATIONS
Cartridge Type Standard Nano ber
Product No. 601307 601317
Length 36"
Filter Area 318 sq.ft. of media
Pleat Count 318 pleats
Maximum Working
Temperature
180
º
F
Filtration E ciency* 99.9% of particles down to 5 µm 99.9% of particles down to 0.35 µm
MERV (Minimum E ciency
Reporting Value)
11 15
Air Permeability 15 cfm/sq.ft. @ 0.5’’ H
2
O 28 cfm/sq.ft. @ 0.5’’ H
2
O
Flame Retardant Optional Included
CONSTRUCTION
Media Type 85/15 Media Cellulose Polyester Blend
Top Cap
Electro GalvanizedBottom Cap
Inner Core
Outer Core Two Polyester Bands
To Next Page
Loading...