IT Works CPL500W - Features; PLC Features; Wireless Features; Safety Precautions

To Next Page

To Previous Page

FEATURES

PLC Features

• Power voltage range is 100 to 240 V AC 50/60 Hz.

• Support the HomePlug AV protocol and the IEEE1901 protocol.

• PLC physical link rate is up to 500 Mbps.

• Support the following modulation schemes: OFDM QAM 4096/1024/256/64/16/8, QPSK, BPSK, and ROBO.

• Support 128-bit AES link encryption and user NMK authentication, for providing secure power line communication.

• Support windowed OFDM with noise mitigation based on patented line synchronization technique, for improving data

integrity in noisy conditions.

• Support channel self-adaptation and channel estimation for maximizing real-time throughput.

• Support priority-based CSMA/CA channel access scheme for maximizing efficiency and throughput.

• Support four-level QoS.

• Support ToS and CoS packet classifications.

• Support IGMP multicast management session.

Wireless Features

• Support IEEE802.11b, IEEE802.11g, IEEE802.11n, IEEE802.3, IEEE802.3u, IEEE802.11i and IEEE802.11e.

• Support 2T2R mode. Transmission data rate is up to 300 Mbps.

• Support WEP and WPA for secure data transmission.

• Support DHCP server.

• Support version upgrade through Web page.

• Support restoring factory default settings.

• Support the following wireless security modes: WEP, WPA-PSK, WPA2-PSK, and WPA/WPA2-PSK Mixed.

• Support system status display.

• Support system log.

SAFETY PRECAUTIONS

This device is intended for connection to the AC power line. Before using this product, please read the following precautions:

• Follow all warnings and instructions marked on the product.

• Unplug the device from the wall outlet before cleaning. Use a dry cloth for cleaning. Do not use liquid cleaners or aerosol

cleaners.

• Do not put this product near water.

• Do not put this product near a radiator or heat source.

• Do not use an extension cord between the device and the AC power source.

• Only a qualified technician should service this product. Opening or removing covers may result in exposure to dangerous

voltage points or other risks.

• Unplug the device from the wall outlet and refer the product to qualified service personnel for the following conditions:

Downloaded from www.vandenborre.be