4
− If liquid has been spilled into the product;
− If the product has been exposed to rain or water;
− If the product does not operate normally when the operating instructions are followed;
− If the product exhibits a distinct change in performance.
This mark is applied to show the equipment conforms to European safety and electro-magnetic compatibility
standards.
OVERVIEW
Product Introduction
The product is compatible with the HomePlug AV, IEEE1901 and 802.11b/g/n protocols. It supports CCK and OFDM modulation
schemes. Its PLC physical link rate is up to 500 Mbps, and its wireless physical rate is up to 300Mbps in the 802.11n mode.
The product supports 128-bit AES link encryption of power line communication and wireless security modes including WEP, WPA-
PSK, WPA2-PSK, and WPA/WPA2-PSK mixed, which provide secure and reliable communication for users.
Packing List
Please check whether your packing list includes the following items:
• 1 x 500 Mbps Powerline Wireless Adapter
• 1x 500 Mbps Powerline Passthrough Adapters
• 2x Network cables
• User manual (CD)
HARDWARE DESCRIPTION AND DEVICE CONNECTION
LED Status Description and Pushbutton Description
There are 5 LED indicators on the front panel of the PLC wireless adapter. By observing their status, you can check whether the
device runs normally.
The following table describes the status of LED indicators on the front panel.
Downloaded from www.vandenborre.be
To Next Page
Loading...