Need help?Do you have a question about the IT Works CPL500W and is the answer not in the manual?
Lists technical features of the PLC adapters.
Lists technical features of the wireless adapters.
Introduces the PLC wireless adapter product.
Lists the items included in the product package.
Explains LED indicators and buttons on the adapter.
Lists prerequisites for installing the device.
Provides important notes before starting installation.
Step-by-step guide to physically connect the adapter.
Guides on manually setting network adapter properties in Windows XP.
Verifies connectivity by pinging the adapter's IP address.
Steps to access and log into the PLC wireless adapter's web interface.
Instructions to change the default login password.
Configures wireless network name (SSID) and other parameters.
Configures wireless security modes like WEP, WPA, WPA2.
Reviews and finalizes the setup configuration.
Configures basic wireless network parameters like SSID and mode.
Describes using PBC button for WPS connection.
Describes using PIN for WPS connection.
Describes using AP-PIN for WPS connection.
Displays information about the local PLC adapter.
Lists connected remote PLC devices.
Configures advanced wireless parameters.
Manages MAC address filtering for network access.
Configures advanced wireless security settings.
Manages device settings, including password.
Explains how to reboot or reset the adapter.
Instructions for updating the adapter's firmware.
Displays detailed system and network information.
Steps to create a new HomePlug AV network.
Steps for a new device to join an existing AVLN.
Steps to remove a device from an AVLN.
Troubleshooting steps for LED indicators.
Troubleshooting steps for accessing the web interface.
Steps to restore factory default settings.
To Next Page
General