ITC TI-120S - Specifications

7. SPECIFICATIONS
10
AMPLIFIER SECTION
(4OHMS LOAD OUTPUT)
RATED OUTPUT POWER (THD 1%)
SPEAKER ZONE 1~5 OUTPUT 25W
INPUT SENSITIVITY/IMPEDANCE
S/N
MIC INPUT SECTION
(MIC 1~4 IN@1KHZ)
LINE INPUT SECTION
(LINE1~2 IN@1KHZ)
INPUT SENSITIVITY/IMPEDANCE
INPUT SENSITIVITY/IMPEDANCE
S/N RATIO
S/N
FREQUENCY RESPONSE ( 3DB)
FREQUENCY RESPONSE ( 3DB)
PHANTOM POWER
TONE CONTROL (BASS:100HZ,
TREBLE:10KHZ)
TONE CONTROL (BASS:100HZ,
TREBLE:10KHZ)
FREQUENCY RESPONSE ( 3DB)
PRE AMP OUT(MIC 1~4, LINE 1~2, TEL IN, REMOTE IN)
T.H.D
REMOTE MIC SENSITIVITY/IMPEDANCS
POWER SOURCE
POWER CONSUMPTION
WEIGHT
DIMENSIONS(mm)
TEL AUDIO INPUT
350W(RMS) 240W(RMS) 120W(RMS)
70W MAX 50W MAX 25W MAX
TI 350S TI-240S TI-120S
5MV 600 -245MV 5K BAL
350mV/47K
Better than 55dB
Better than 65dB
50Hz~16KHz
50Hz~16KHz
+10dB
10dB
+48V
0.775V/10K
Better than 65dB
50Hz~16KHz
1V/600
Less than 0.1% at 1KHz,1/3 rated power
775mV/10K
~220-240V;
50/60Hz, 24VDC
500W 320W 180W
484x399x132
22.4Kg 20.15Kg 16.9Kg