● This product uses a power plug or appliance input socket as a disconnecting device with the
power supply, and must be disconnected if necessary for safety reasons.
● This equipment is only suitable for safe use at altitudes above 2000 meters.
1. The installation environment
When installing the unit, in order to ensure the normal cooling of the host, should avoid the poor
ventilation of the place or high temperature environment, to avoid direct sunlight.
Recommend to install cabinet or other well-ventilated place indoor. If you use the machine
in the outdoors, please pay attention to waterproof, moisture, lightning protection measures.
Avoid installing in a violent place of vibration; do not place other equipment on the machine.
Working temperature : -10℃~ 60℃.
Humidity is limited to 5% to 90% (non-condensing).
2. To avoid electric shock and fire
Do not touch the hands and the source with wet hands
Do not spill liquid on the machine, so as to avoid short-circuit or fire inside the machine.
Do not place other equipment directly on the top of the unit.
Non-professional service personnel Do not disassemble the unit yourself to avoid damage
and electric shock.
3. Transport and handling
The packaging of the machine is designed and tested to ensure that the host will not be
accidentally damaged during transport. It is best to use the original packaging when handling the
unit.
Do not move the host device between the place or cold or over hot to avoid condensation inside the
machine, affecting equipment life.
4. Please follow the warning instructions on this product, the warning signs on behalf of:
Applicable to 2000 meters above sea level and below safe use
Safe use only in non-tropical climates
To Next Page
Loading...
Need help?
General
