ITech IT-M7700 - Fetch[:Scalar]:Current:peak:minus; Fetch[:Scalar]:Thd; Fetch[:Scalar]:Current:thd

3-phase/series commands
Copyright© Itech Electronic Co., Ltd. 100
FETCh[:SCALar]:CURRent:PEAK:MINUs?
This command reads the positive minus peak current.
Syntax
FETCh[:SCALar]:CURRent:PEAK:MINUs? <A|B|C|ALL>
Arguments
<A|B|C|ALL>
Returns
<NRf|NRf|NRf|NRf,NRf,NRf>
FETCh[:SCALar]:THD?
This command reads the total voltage harmonic distortion.
Syntax
FETCh[:SCALar]:THD? <A|B|C|ALL>
Arguments
<A|B|C|ALL>
Returns
<NRf|NRf|NRf|NRf,NRf,NRf>
FETCh[:SCALar]:CURRent:THD?
This command reads the total current harmonic distortion.
Syntax
FETCh[:SCALar]:CURRent:THD? <A|B|C|ALL>
Arguments
<A|B|C|ALL>
Returns
<NRf|NRf|NRf|NRf,NRf,NRf>