ITech IT-M7700 - Chapter 8 Protect Subsystem; Protect:rms:voltage; Protect:peak:voltage; Protect:rms:unvoltage

PROTect Subsystem
Copyright© Itech Electronic Co., Ltd. 56
Chapter 8 PROTect Subsystem
PROTect:RMS:VOLTage
This command is used to set the OVPrms value.
Syntax
PROTect:RMS:VOLTage <NRf>
Arguments：
<NRf>
Query Syntax：
PROTect:RMS:VOLTage?
Returns：
<NRf>
PROTect:PEAK:VOLTage
This command is used to set the OVPpeak value.
Syntax
PROTect:PEAK:VOLTage <NRf>
Arguments：
<NRf>
Query Syntax：
PROTect:PEAK:VOLTage?
Returns：
<NRf>
PROTect:RMS:UNVOLTage
This command is used to set the UVPrms value.