ITech IT-M7700 - System:pownon; System:communicate:select

SYSTem Subsystem
Copyright© Itech Electronic Co., Ltd. 30
Returns:
<ON|OFF>
SYSTem:POWnon
This command controls the settings and output state when the power supply is
powered on.
Syntax
SYSTem:POWnon <LAST+OFF|LAST|RESET|0|1|2>
Arguments
<LAST+OFF|LAST|RESET|0|1|2>
Example
SYSTem:POWnon LAST+OFF
SYSTem:POWnon?
This command is used to query some parameter settings or working status
when the instrument is powered on.
Syntax
SYSTem:POWnon?
Arguments：
None
Returns:
<LAST+OFF|LAST|RESET>
SYSTem:COMMunicate:SELect
This command is used to select the communication interface.
Syntax
SYSTem:COMMunicate:SELect <RS232|GPIB|USB|LAN|CAN>
Arguments
<RS232|GPIB|USB|LAN|CAN| 0|1|2|3|4>