ITech IT-M7700 Programming Guide

SOURce Subsystem
Copyright© Itech Electronic Co., Ltd. 43
Chapter 6 SOURce Subsystem
[SOURce:]RELAy:MODe
This command is used to set the relay mode.
Syntax
[SOURce:]RELAy:MODe <0|1|OUTSYN|NC>
Arguments：
<0|1|OUTSYN|NC>
OUTSYN: The relay is linked with Output; NC:The relay is normally closed.
Whether
Query Syntax：
[SOURce:]RELAy:MODe?
Returns：
<OUTSYN|NC>
[SOURce:]NORMal:VOLTage:AC[:LEVel][:IMMediate][:
AMPLitude]
This command sets the AC voltage of the power supply.
Syntax
[SOURce:]NORMal:VOLTage:AC[:LEVel][:IMMediate][:AMPLitude] <NRf>
Arguments：
<NRf>
Query Syntax：
[SOURce:]NORMal:VOLTage:AC[:LEVel][:IMMediate][:AMPLitude]?
Returns：
<NRf>

ITech IT-M7700 Specifications

General

Brand	ITech
Model	IT-M7700
Category	Portable Generator
Language	English