ITech IT-M7700 Programming Guide

SOURce Subsystem(IT-M7700)
Copyright© Itech Electronic Co., Ltd. 51
Note
This command is a special command of IT-M7723.
The response time of this command is at least greater than 100ms.
[SOURce:]NORMal:WAVE
This command is used to set the wave.
Syntax
[SOURce:]NORMal:WAVE
<0|1|2|3|4|SINE|SQUA|TRIANGLE|SAW|CLIPSINE>
Arguments：
<0|1|2|3|4|SINE|SQUA|TRIANGLE|SAW|CLIPSINE>
Query Syntax：
[SOURce:]NORMal:WAVE?
Returns：
<SINE|SQUA|TRIANGLE|SAW|CLIPSINE>
[SOURce:]NORMal:WAVE:THD
This command is used to set the THD.
Syntax
[SOURce:]NORMal:WAVE:THD <NR1>
Arguments：
<NR1> 1~30 => THD1~THD30
Query Syntax：
[SOURce:]NORMal:WAVE:THD?
Returns：
<String> THD1~THD30
[SOURce:]NORMal:WAVE:USER
This command is used to set the USER wave.

ITech IT-M7700 Specifications

General

Brand	ITech
Model	IT-M7700
Category	Portable Generator
Language	English