ITech IT-M7700 - [Source:]Normal:wave:csine; [Source:]Normal:dimmer[:Phase]

SOURce Subsystem(IT-M7700)
Copyright© Itech Electronic Co., Ltd. 52
Syntax
[SOURce:]NORMal:WAVE:USER <NR1>
Arguments：
<NR1> 1~5 => USER1~USER5
Query Syntax：
[SOURce:]NORMal:WAVE:USER?
Returns：
<String> USER1~USER5
[SOURce:]NORMal:WAVE:CSINe
This command is used to set the clipped percentage of the Clip Sine waveform.
Syntax
[SOURce:]NORMal:WAVE:CSINe <NRf>
Arguments：
<NRf> 0 ~ 100.0 => (0~100.0%)
Query Syntax：
[SOURce:]NORMal:WAVE:CSINe?
Returns：
<NRf>
[SOURce:]NORMal:DIMMer[:PHASe]
This command is used to set the phase angle of the phase dimming function.
Syntax
[SOURce:]NORMal:DIMMer[:PHASe] <NR1>
Arguments：
<NRf> (0.0°~ 180.0°)
Query Syntax：
[SOURce:]NORMal:DIMMer[:PHASe]?