IEEE-488 Common Commands
Copyright© Itech Electronic Co., Ltd. 26
Arguments
ON|1|OFF|0
Query Syntax
*PSC?
Returns
<ON|1|OFF|0>
*SAV
Save the instrument several parameter settings to 10 nonvolatile memories,
and the position can be set from 0 to 9. When shipped, locations 0 through 9
are empty. The specific parameter information can be found in the user manual.
Syntax
*SAV <NR1>
Arguments
0~9
*RCL
Recalls a saved instrument state. This restores the instrument to a state that
was previously stored in locations 0 through 9 with the *SAV command.
Syntax
*RCL <NR1>
Arguments
0～9
To Next Page
Loading...
