ITech IT-M7723 - Protect:peak:voltage; Protect:rms:unvoltage; Protect:rms:current

3-phase/series commands
Copyright© Itech Electronic Co., Ltd. 91
PROTect:PEAK:VOLTage
This command is used to set the OVPpeak value.
Syntax
PROTect:PEAK:VOLTage <A|B|C|ALL>,<NRf>
Arguments
<A|B|C|ALL>,<NRf>
Query Syntax
PROTect:PEAK:VOLTage? <A|B|C|ALL>
Returns
<NRf|NRf|NRf|NRf,NRf,NRf>
PROTect:RMS:UNVOLTage
This command is used to set the UVPrms value.
Syntax
PROTect:RMS:UNVOLTage <A|B|C|ALL>,<NRf>
Arguments
<A|B|C|ALL>,<NRf>
Query Syntax
PROTect:RMS:UNVOLTage? <A|B|C|ALL>
Returns
<NRf|NRf|NRf|NRf,NRf,NRf>
PROTect:RMS:CURRent
This command is used to set the OCPrms value.
Syntax
PROTect:RMS:CURRent <A|B|C|ALL>,<NRf>
Arguments
<A|B|C|ALL>,<NRf>