ITech IT-M7723 - System:communicate:serial[:Self]:Baudrate; System:communicate:gpib[:Self]:Address

SYSTem Subsystem
Copyright© Itech Electronic Co., Ltd. 31
Example
SYST:COMM:SEL RS232
Query Syntax
SYSTem:COMMunicate:SELect?
Returns
<RS232|GPIB|USB|LAN|CAN>
SYSTem:COMMunicate:SERial[:SELF]:BAUDrate
This command is used to set the baudrate of RS232.
Syntax
SYSTem:COMMunicate:SERial[:SELF]:BAUDrate
<4800|9600|19200|38400|57600|115200>
Arguments
<4800|9600|19200|38400|57600|115200>
Query Syntax
SYSTem:COMMunicate:SERial[:SELF]:BAUDrate?
Returns
<4800|9600|19200|38400|57600|115200>
SYSTem:COMMunicate:GPIB[:SELF]:ADDRess
This command is used to set the GPIB communication address.
Syntax
SYSTem:COMMunicate:GPIB[:SELF]:ADDRess <NR1>
Arguments：
<NR1>
Setting range: 1 to 30.
Default value：
1