ITech IT-M7723 - Protect:clear; Protect:sense:check

PROTect Subsystem
Copyright© Itech Electronic Co., Ltd. 59
Syntax
PROTect:RMS:CURRent:MIN[:LEVel] <NRf>
Arguments：
<NRf>
Query Syntax：
PROTect:RMS:CURRent:MIN[:LEVel]?
Returns：
<NRf>
PROTect:CLEar
This command clears the protection status.
Syntax
PROTect:CLEar
Arguments：
None
PROTect:SENse:CHECK
This command is used to set the sense check protection.
Syntax
PROTect:SENse:CHECK <0|1|OFF|ON>
Arguments：
<0|1|OFF|ON>
Query Syntax：
PROTect:SENse:CHECK?
Returns:
<OFF|ON>