ITech IT-M7723 - System:communicate:can[:Self]:Address; System:communicate:can[:Self]:Baudrate

SYSTem Subsystem
Copyright© Itech Electronic Co., Ltd. 32
Query Syntax：
SYSTem:COMMunicate:GPIB[:SELF]:ADDRess?
Returns：
<NR1>
SYSTem:COMMunicate:CAN[:SELF]:ADDRess
This command is used to set the CAN communication address.
Syntax
SYSTem:COMMunicate:CAN[:SELF]:ADDRess <NR1>
Arguments：
<NR1>
Setting range: 1 to 127.
Default value：
1
Query Syntax：
SYSTem:COMMunicate:CAN[:SELF]:ADDRess?
Returns：
<NR1>
SYSTem:COMMunicate:CAN[:SELF]:BAUDrate
This command is used to set the baudrate of CAN.
Syntax
SYSTem:COMMunicate:CAN[:SELF]:BAUDrate <0|1|2>
Arguments：
<0|1|2>
⚫ 0: Indicates that the CANBUS baud rate of the power supply is 500K.
⚫ 1: Indicates that the CANBUS baud rate of the power supply is 250K.
⚫ 2: Indicates that the CANBUS baud rate of the power supply is 125K.