ITech IT-M7723 - List:run:record; List:run:state; List:configure

LIST Subsystem(IT-M7700)
Copyright© Itech Electronic Co., Ltd. 63
Syntax
LIST:ENDState <0|1>
Arguments：
<0|1>: 0 Stop output, 1 Keep last state.
Query Syntax:
LIST:ENDState?
Returns:
<0|1>
LIST:RUN:RECOrd?
This command is used to query the record index during List running.
Syntax
LIST:RUN:RECOrd?
Arguments：
None
Returns:
<NR1>
LIST:RUN:STATe?
This command queries the List operation state.
Syntax
LIST:RUN:STATe?
Arguments：
None
Returns：
<0|1>
LIST:CONFigure
This command is used to set the Arguments for each group of Lists. Configure