ITech IT6121B - Page 41

Specification
Copyright © ITECH Electronics Co., Ltd. 34
DVM
Display accuracy
Low Range (0 ~±5.5V) ≤±1.5mV
High Range (0 ~±40V) ≤0.02%±3mV
Display
Temp.coefficient
(% of Intput/°C +Offset
0.02%+2 mV
Display stability -30min
(% of Output +Offset)
0.02%+2 mV
Display stability -8 h
(% of Output +Offset)
0.02%+2.5 mV
Measurement range
-40V - +40V
Input Common-mode
voltage
< 200Vdc
*The above specifications may be subject to change without prior notice.
Rising Time at no load
Voltage
≤ 1mS (*1)
≤2 mS
Rising time at full load
Voltage
≤ 1mS (*1)
≤2 mS
Falling time at no load
Voltage
≤50 mS (*1)
≤120 mS
Falling time at full load
Voltage
≤1 mS (*1)
≤2 mS
Dynamic response time
≤200 uS
AC input
Voltage
220V±10%
Frequency
47HZ-63HZ
Setup stability -30min
（％of Output +Offset）
Voltage
0.01%+2mV
Current
0.1%+20mA
Setup stability -8h
（％of Output +Offset）
Voltage
0.015%+2mV
Current
0.15%+20mA
Readback stability-30min
（％of Output +Offset）
Voltage
0.01%+2mV
Current
0.1%+20mA
Readback stability -8h
（％of Output +Offset）
Voltage
0.015%+2mV
Current
0.15%+20mA
Fuse specification
T 15A
Remote sense
compensation
1V
Programming response
time
20mS (AVG)
Power factor
0.7Max
Maximum input current
15A
Maximum input apparent
power
3000VA
Storage temperature
-10℃~70℃
Protect function
OVP/OCP/OTP
Communication Interface
GPIB/USB/RS232
Withstand voltage(output
to the ground)
200Vdc
Operating temperature
0~40℃
Dimension（mm）
429mmW*88.2mmH*585mmD
Weight（Kg）
30Kg