ITech IT6833A - Stb; Trg; Sav; Rcl

IEEE488.2 Common Order
Copyright © Itech Electronic Co., Ltd. 39
*STB?
This order can read the data from status byte register. This order is similar to a
statistics of series, but the equivalent of another instrument orders, it returns
the value the same as series statistics, but after this order is executed, the bit 6
value of status byte register is cleared, while the status bit will not be cleared
when system statistics implemented.
Quest syntax
*STB?
Parameter
None
Return parameter
<NR1>
Reference order
*CLS
*ESE
*ESR
*TRG
When the trigger mode of the power supply is BUS order trigger mode, the
order will generates a trigger signal.
Order syntax
*TRG
Parameter
none
*SAV
This order can save the parameters of power supply to register.
Order syntax
*SAV <NRf>
Parameter
1 to 71
*RCL
This order can recall the parameter you saved before from the register.
Order syntax
*RCL <NRf>