ITech IT6833A - Status:questionable:condition; Status:questionable:enable

IEEE488.2 Common Order
Copyright © Itech Electronic Co., Ltd. 41
10
no use
-
2
no use
-
9
no use
-
1
OC
2
8
no use
-
0
OV
1
STATus:QUEStionable:CONDition?
This order can be used to read the value of query condition register and to get
the status of the power, if it is CC or CV. The power supply will return a decimal
number corresponding to the binary-weighted sum of each bit of the
register. These bits are not latched. If 0 is returned, then the output
status of the power is OFF or uncertain. If 1 is returned, then the status is
CV mode, if 2 is returned, then the status is CC. If 3 is returned, then
there is error occurred.
Quest syntax
STATus:QUEStionable:CONDition?
Parameter
None
Return parameter
<NR2>
STATus:QUEStionable:ENABle
This order can set the parameter of quest event enable register. The power
supply will return a decimal number which is the binary-weighted sum of the
enable register.
Order syntax
STATus:QUEStionable:ENABle <NR2>
Parameter
0 to 255
The high position 256 to 65535 is empty.
Reset value
Consult *PSC order
Example
STATus:QUEStionable:ENABle 128
Quest syntax
STATus:QUEStionable:ENABle?
Return parameter
<NR2>