IEEE488.2 Commands
Copyright ©ITECH Electronic Co., Ltd. 44
Parameter:
None
*SRE <enabled value>
This order can set the parameter of standard event register. When query
status bit enable register, the power will return a decimal number, this
number is the binary weighted of enable register.
Order syntax:
*SRE <NRf>
Parameter:
0~255
Reset value:
Consult *PSC order
Example:
*SRE 128
Quest syntax:
*SRE?
Return parameter:
<NR1>
Reference Order:
*ESE *ESR? *PSC *STB?
*STB?
This order can read the data from status byte register. This order is similar to a
statistics of series, but the equivalent of another instrument orders, it returns
the value the same as series statistics, but after this order is executed, the bit 6
value of status byte register is cleared, while the status bit will not be cleared
when system statistics implemented.
Quest syntax:
*STB?
Parameter:
None
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com
To Next Page
Loading...
Need help?
General
