ITech IT8511A+ Programming Guide

Input Settings
Copyright © ITECH Electronic Co., Ltd. 40
Query Syntax
[SOURce:]DYNamic:LOW:DWELl?
Returned Parameters
<NR2>
[SOURce:]DYNamic:LOW:DWELl?
This command is used to query the duration of low-level load current in
dynamic mode.
Command Syntax
[SOURce:]DYNamic:LOW:DWELl?
Parameters
None
Unit
S
*RST Value
0.00002
[SOURce:]DYNamic:SLEW <NRf+>
This command is used to set the current slope in dynamic mode.
Command Syntax
[SOURce:]DYNamic:SLEW <NRf+>
Parameters
MIN~MAX|MINimum|MAXimum
Unit
A/uS
*RST Value
MAX
Examples
DYN:SLEW 3
Query Syntax
[SOURce:]DYNamic:SLEW?
Returned Parameters
<NR2>

ITech IT8511A+ Specifications

General

Brand	ITech
Model	IT8511A+
Category	Test Equipment
Language	English