To Next Page

To Previous Page

Load Commands

Reset value:

CURRent

Query Syntax:

[SOURce:]FUNCtion?

Returned value:

CURRent|RESistance|VOLTage|POWer|SHORt

INPut:SHORt

This command indicates whether the short simulation is enabled.

Command syntax:

[SOURce:]INPut:SHORt <bool>

Parameter:

0|1|OFF|ON

Reset value:

Query Syntax:

[SOURce:]INPut:SHORt?

Returned value:

0|1

INPut:SHORt:FUNCtion

This command is used to enable or disable the short function.

Command syntax:

[SOURce:]INPut:SHORt:FUNCtion[:STATe] <bool>

Parameter:

O|1|OFF|ON

Reset value:

Query Syntax:

[SOURce:]INPut:SHORt:FUNCtion[:STATe]?

ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com

ITech IT8625 Programming Guide

Other manuals for ITech IT8625