EasyManuals Logo
Home>ITech>Test Equipment>IT8625

ITech IT8625 Programming Guide

ITech IT8625
77 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #57 background imageLoading...
Page #57 background image
System Commands
Copyright © Itech Electronic Co., Ltd. 46
SYSTem:BEEPer:IMMediate
This command is used to test the beeper. The AC load will beep for once after
executing this command.
Command syntax:
SYSTem:BEEPer:IMMediate
Parameter:
None
Query Syntax:
None
SYSTem:BEEPer
This command is used to turn on or turn off the beeper. When the parameter is
set to 1|ON, the beeper turns on, or the beeper turns off.
Command syntax:
SYSTem:BEEPer[:STATe] <bool>
Parameter:
0|OFF|1|ON
Query Syntax:
SYSTem:BEEPer[:STATe]?
Returned value:
0|1
SYSTem:VERSion?
This command is used to query the device version. Return value is a character
string as like.”YYYY.V.YYYY represents the year and V means the version of
that year.
Command syntax:
SYSTem:VERSion?
Parameter:
None
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com

Table of Contents

Other manuals for ITech IT8625

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ITech IT8625 and is the answer not in the manual?

ITech IT8625 Specifications

General IconGeneral
BrandITech
ModelIT8625
CategoryTest Equipment
LanguageEnglish

Related product manuals