Iteris VersiCam - Tools and Equipment

User Guide
7
1.2 Tools and Equipment
Iteris Supplied Parts
The following items come supplied with the system:
•
VersiCam Camera Processor
•
ICC Module
•
Scotchlok 4460-D Shield Connector
•
Surge suppression
•
6’ (1.8meter) coax cable
•
Mouse
•
Small slotted screwdriver
Customer Supplied Parts
The following items should be supplied by the customer/installer of the system:
•
IMSA 39-2 / 40-2, 3 Pair Stranded, 19AWG (Example: Belden 581718)
•
Stainless Steel Banding Material
•
Cable Strain Relief for IMSA cable
•
Miscellaneous Supplies: Electrical Tape, Tie Wraps
Tools Required for Installation
The following tools are required for installation of the VersiCam system:
•
Various Screwdrivers
•
Adjustable Wrench and Nut Drivers
•
Wire Strippers and Wire Cutters
•
Banding Tool
•
Fish Tape (Non-Conductive)
•
Hole Saw

Note:
Refer to Section 10: Technical Information for specification of the IMSA cable.