EasyManuals Logo

ITRON OpenWay Riva 500W ERT User Manual

ITRON OpenWay Riva 500W ERT
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
Module wire color
Red Black White
Register manufacturer Register screw color designator
Cyble Sensor
Krohne IFC Term B Term H Term B
RG3 Tomahawk Green Black Green
Sensus PMM Red Black Bare
Verifying Operation
Use one of the following handheld computers to verify consumption:
FC300SR handheld computer
Itron Mobile Radio connected to a user-supplied computer or Bluetooth device
Caution: Verifying the OpenWay Riva 500W ERT Pit Module operation requires
an FC300SR handheld computer or Itron Mobile Radio running FDM v4.0 or
higher. Legacy Itron handheld programming devices cannot read the pit modules.
Each handheld radio requires special setup and configuration parameters to successfully
read and program the pit module. Refer to the respective meter reading application for
specific instructions.
When comparing the actual register value to that reported by the pit module, please keep in
mind the 500W ERT module's consumption value is updated once an hour when it is in Run
Mode.
08 January 2020 815-0006-01 Itron, Inc. Page 21 of 48
Template 3 Initializing, Connecting, and Programming the Pit Module

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ITRON OpenWay Riva 500W ERT and is the answer not in the manual?

ITRON OpenWay Riva 500W ERT Specifications

General IconGeneral
BrandITRON
ModelOpenWay Riva 500W ERT
CategoryControl Unit
LanguageEnglish

Related product manuals