ITRON OpenWay Riva 500W ERT - Installing the Module in the Pit Lid

This section provides the instructions to install the pit module in a pit lid with a hole using the pit lid
mounting bracket. Verify that you have the following items to complete the installation.
1 Pit lid with a pre-drilled hole User-supplied
2 Through-the-lid retainer clip CFG-1601-001
3 Retainer clip collar
4 OpenWay Riva 500W ERT pit module ERW-1601-001
Installing the Module in the Pit Lid
1. Insert the retainer clip into the pit lid hole with the convex surface on the top of the pit lid.
08 January 2020 815-0006-01 Itron, Inc. Page 25 of 48
Template 4 Installing the OpenWay Riva 500W ERT Pit Module