ITRON OpenWay Riva 500W ERT User Manual

Wall Mount Installation
Important! Wall mount installation in a pit requires the mounting adapter from the
remote antenna kit. For more information, see Pit module mounting accessories.
Select a flat vertical mounting surface. Install the pit module in an upright position. Locate the pit
module as high as possible in a 500W ERT pit box. Maintain a distance of one to two inches from
the bottom of the pit box lid.
Caution
Observe the following guidelines for mounting the pit module using the wall mount procedure:
■
ERT module positioning other than upright will negatively affect radio performance.
■
Use inline connectors to connect the OpenWay Riva 500W ERT module to the register or
meter. If a splice is required to connect the register or meter, you must use the Itron splice kit
(OEM-0034-002).
The pit module works accurately with Itron-approved cable type and lengths up to 300 feet.
08 January 2020 815-0006-01 Itron, Inc. Page 30 of 48
Template 4 Installing the OpenWay Riva 500W ERT Pit Module

ITRON OpenWay Riva 500W ERT Specifications

General

Brand	ITRON
Model	OpenWay Riva 500W ERT
Category	Control Unit
Language	English