ITRON ERT 40W User Manual

Water Solutions
Installing 40W and 50W ERT
®
Modules
Revision B

ITRON ERT 40W Specifications

General

Brand	ITRON
Model	ERT 40W
Category	Control Unit
Language	English

Summary

SECTION 1. INTRODUCTION

1.1 Installation Procedures

Procedures for 40W and 50W ERT modules are identical.

1.4 Meter-ERT Compatibility

Lists compatible meters for 40W/50W ERT modules with a compatibility table.

1.5 40W & 50W ERT Configurations

Illustrates installation configurations for 40W/50W ERT modules with various meter types.

1.6 Installation Kits

1.7 Tools and Materials You Must Supply

Lists the tools and materials required for installing 40W/50W ERT modules.

SECTION 2. INSTALLING THE BADGER DIRECT-MOUNT

ERT Module and Wire Connection

Register Connection and Final Security

SECTION 3. INSTALLING THE AMCO (ABB) SCANCODER, InVISION, OR DIGITAL DIRECT-MOUNT

Initial Setup and Bracket Preparation

ERT Module Wiring and Assembly

Securing ERT Module to Register

Final Installation Steps

Reinstall terminal cover, program ERT module, and review programming cautions.

SECTION 4. INSTALLING THE SCHLUMBERGER ARB V OR PROREAD REGISTER-MOUNT

Register Preparation and ERT Module Selection

Wire Stripping and Connection to Register

Strip ERT wires and connect them to specific screw terminals on the register.

Securing the ERT Module

SECTION 5. INSTALLING THE SENSUS ECR OR ICE REGISTER MOUNT

Wire Connection to Register Terminals

Connect ERT wires to register terminals (B, R, G) following clockwise rule.

ERT Module Mounting and Securing

SECTION 6. INSTALLING A REMOTE MOUNT

Wire Preparation and General Connection

Register-Specific Wiring Connections

Details wiring connections for AMCO, Badger, Hersey, Schlumberger, and Sensus registers.

ERT Module Bracket Mounting and Securing

Covers bracket placement, ERT module attachment, and securing with screws/seals.

APPENDIX A. CONNECTING CABLE WIRES WITH GEL CONNECTORS

Pushing Wires into Connector

Push wires into gel connector without stripping insulation.

Crimping the Gel Connector

Final Crimp Check and Sealant Handling