ITRON ERT 40W User Manual

Installing 40W and 50W ERT Modules
7-2
Loosen the
band-clamp screw
until the
end of the band
comes loose from the
screw assembly.
Get a bracket
and a band clamp
from the pipe mount/
register mount
installation kit.
7-1
00864x
00867
7-3
00787
UP
SECTION 7. PIPE MOUNTS (AND REGISTER MOUNTS REQUIRING A
BAND CLAMP)
Always install an ERT module right side up, as indicated by the on the label.
NOTE: Use this section to install an ERT module on a Schlumberger or Sensus
register.
00775x
7-1
Push the
end of the band through
this hole in the
bracket.

ITRON ERT 40W Specifications

General

Brand	ITRON
Model	ERT 40W
Category	Control Unit
Language	English