ITRON ERT 40W User Manual

Installing 40W and 50W ERT Modules PUB-0126-001 4/04
Configuration Kit (part number CFG-0067-001). This kit contains the accessories for remote-mounting a
40W or 50W Scancoder ERT module to an adapter plate, wood, or sheet metal surface. The contents of
this kit are illustrated in Appendix B.
Configuration Kit (part number CFG-0067-002). This kit contains the accessories for remote-mounting all
other 40W or 50W ERT modules (including the ABB Digital ERT) described in this manual to adapter
plates, wood, or sheet metal surfaces. The contents of this kit are illustrated in Appendix B.
40W & 50W Pipe Mount and Register-Mount Installation Kit. Use this kit to remote-mount the 40W or 50W
ERT module on a pipe, or to direct-mount the 40W or 50W ERT module on a register. One of these kits
can be ordered for each ERT module. These kits come with a choice of three band clamp sizes. To select
the correct size, see Water ERT Ordering Guide (PUB-0063-001). The contents of this kit are illustrated in
Appendix B. NOTE: There is an additional charge for this kit.
1.6 Installation Kits
1–6
To order the above kits, see the Water ERT Ordering Guide
(PUB-0063-001).

ITRON ERT 40W Specifications

General

Brand	ITRON
Model	ERT 40W
Category	Control Unit
Language	English