ITRON 100W-R - User Manual

Water Solutions
100W-R and 100WP-R Datalogging ERT
Module Installation Guide
TDC-0951-004

ITRON 100W-R Specifications

General

Brand	ITRON
Model	100W-R
Category	Control Unit
Language	English

Summary

Chapter 1 Before You Begin

Document Conventions

Explains symbols, formatting, and notes used throughout the guide.

Document Purpose

Outlines the guide's aim to provide installation steps for ERT modules.

How This Document is Organized

Details the chapter structure and content of the installation guide.

Related Documents

Lists other Itron documentation and their part numbers.

Chapter 2 About the 100 W-R and 100 WP-R ERT Module

100 W-R and 100 WP-R Models

Details the different models of 100W-R and 100WP-R ERT modules available.

Battery Life

Provides expected battery life for ERT modules under different operating conditions.

100 W-R and 100 WP-R Transmission Modes

Explains various RF transmission modes like Fixed Network and Mobile.

100 W-R Operating Modes

Describes the operating modes for the 100W-R ERT module, including Factory and Run.

100 WP-R Operating Modes

Details the operating modes for the 100WP-R ERT module, including Factory and Run.

Chapter 3 Initializing, Programming, and Connecting the ERT Module

Initializing the 100 W-R

Provides instructions for initializing the 100W-R ERT module using handheld computers.

100 W-R Encoder Start-up

Explains the automatic start-up process for the 100W-R encoder ERT module.

Programming the 100 WP-R

Details the programming requirements for the 100WP-R ERT module using FDM software.

100 WP-R Pulser Start-up

Describes the start-up procedure for the 100WP-R pulser ERT module after programming.

Connecting the 100 W-R to a Remote Meter Register

Guides on connecting the 100W-R ERT module wires to meter register terminals.

Connecting the 100 WP-R to a Remote Meter Register

Guides on connecting the 100WP-R ERT module wires to meter register terminals.

Verifying 100 W-R and 100 WP-R ERT Module Operation

Instructions for verifying ERT module operation and data recording.

Chapter 4 Installing the 100 W-R and 100 WP-R ERT Modules

100 W-R and 100 WP-R ERT Module Accessories

Lists necessary accessories and their part numbers for ERT module installation.

Installing 100 W-R and 100 WP-R Cable Strain Relief

Details how to install cable strain relief for ERT module connections.

Required Materials

Lists tools and materials needed for remote mount installation.

Attaching the Backplate

Provides steps for attaching the ERT module backplate for mounting.

Pipe Mount Installation

Guides on mounting the ERT module onto a pipe using a mounting kit.

Required Equipment

Lists necessary equipment for Leak Sensor installation.

Pipe Preparation

Instructions on cleaning the pipe surface for Leak Sensor installation.

Optional Leak Sensor Installation

Describes the process of installing the Leak Sensor with ERT modules.

Connecting the Leak Sensor to the 100 W-R and 100 WP-R ERT Modules

Guides on connecting the Leak Sensor wires to the ERT module.

Direct-Mounting to the Meter Register

Details direct mounting of ERT modules to compatible meter registers.

Appendix B Troubleshooting

Appendix A Using Gel-cap Connectors