ITRON 100W-R User Manual

Installing the 100W-R and 100WP-R ERT Modules
TDC-0951-005 100W-R and 100WP-R Datalogging ERT Module Installation Guide 24
Proprietary and Confidential
2. Verify the pipe’s mounting surface is free from dirt and debris. Place the curved surface of the LS against
the pipe.
3. Insert the mounting U-bolt over the pipe and into the LS mounting holes.
Caution Do not mount the Leak Sensor on a pipe coupler, joint, or nut.

ITRON 100W-R Specifications

General

Brand	ITRON
Model	100W-R
Category	Control Unit
Language	English