ITRON 100W-R User Manual

Installing the 100W-R and 100WP-R ERT Modules
TDC-0951-005 100W-R and 100WP-R Datalogging ERT Module Installation Guide 12
Proprietary and Confidential
Required Materials
 Remote Mount Kit
 CFG-0771-021, single cable port for register connection
 CFG-1300-003, dual cable ports for Leak Sensor and register connection
 Sidecutter pliers
 Gel connector crimping tool
 Cable tie gun
 Torx T-15 screwdriver
To install the remote ERT module cable strain relief
1. Wrap the cable tie around the meter register or Leak Sensor cable.
2. Insert the pointed end of the cable tie into the receptacle end of the cable tie with the ribbed edge facing
in.

ITRON 100W-R Specifications

General

Brand	ITRON
Model	100W-R
Category	Control Unit
Language	English