ITW Dynatec DYNAMELT D45 Series - Performance Characteristics; DynaControl V6 Controller Features

ITW Dynatec
D15/D25/D45 V6 DC L ASU Manual #20-63
Description Page 2-3
Revised 10/14
Performance
Operating temperature range 38Cto218C (100F to 425F)..............................
Adhesive temperature control accuracy  1C( 1F)....................................
Standby adhesive temperature range up to 80C (150F) lower than setpoint..................
Hopper ready adhesive temperature deviation
(factory set/ field adjustable)  20C(36F) from setpoint
Over-temperature cutoff for hopper 218C (425F).......................................
Adhesive viscosity 1000 to 50,000 centipoise or.........................................
50,000 to 100,000 cps at reduced melt rate
Warm-up time, full hopper approximately 0.5 hour.......................................
Adhesive delivery rate, open line 0.38 kg/min (0.83 lb/min)(4.5cc gear pump).................
Typical adhesive melt rate (depends on adhesive used) all standard models = 23kg/hr (50 lb/hr)...
D25 or D45 w. optional grid = 41kg/hr (90 lb/hr)
D45 w. 2 optional grids = 59kg/hr (130 lb/hr)
Adhesive pressure up to 68 bar (1000 psi) maximum.....................................
Maximum recommended pump speed 90 revolutions per minute (gear pump)..................
Fuses 5x20 mm, hose/ head: T6.3AL time delay........................................
DynaControl V6 Controller
Power board 5 zones per board, modular construction.....................................
Auxiliary board 5 zones per board, modular construction..................................
Temperature control zones 5-15 triac-output............................................
Fuses 13 on main power board, 10 on each auxiliary power board: 10 Amp...................
Display languages English, German, Spanish, French, Japanese, Chinese.....................
Operator interface (standard) LCD graphic display with rotary-knob controller and simple icons...
Operator interface (option) color touch screen with expanded features.......................
Temperature standby yes...........................................................
High and low temp alarms yes.......................................................
Ready interlock yes...............................................................
Password protection yes............................................................
Priority (sequential) heating yes (hopper, hose, head staged heating).........................
Sensor open alarm yes.............................................................
Remote communications capable yes.................................................
Seven-day scheduler yes...........................................................
Adhesive level sensor yes..........................................................
CE approval yes..................................................................