ITW Mima ECOMAT PLUS - User Manual

ECOMAT EASY / GIROTEC WRS
Version G0101
ECOMAT EASY H / GIROTEC WRS H
Version G0301
ECOMAT PLUS / ECOMAT PLUS H
Versions G0503 / G0603
MAINTENANCE INSTRUCTIONS
V 2.0

Summary

1. Maintenance of Turn Table Machine

1.1 Film Distributor Maintenance

Check list for film distributor components: rollers, chains, sensors, and mechanisms.

1.1.2 General Maintenance Actions

General maintenance tasks include cleaning rollers, lubricating mechanisms, and wiping dust.

1.1.3 Tensioning Pre-Stretch Toothed Belt

Step-by-step guide to tension the pre-stretch toothed belt on Ecomat Plus.

1.1.4 Changing Pre-Stretch Components

Procedure for changing pre-stretch belt, rollers, bearings, and ratio on Ecomat Plus.

1.1.5 Adjusting Dancing Roller Tension

Instructions for adjusting the dancing roller tension using specific nuts and screws.

1.1.6 Changing Brake Roller Components

Procedure to change brake roller, tension spring, and brake plate on Ecomat Easy.

1.1.7 Changing Film Distributor Guide Rollers

Instructions for changing guide rollers, with reference to pages 17-19.

1.2 Vertical Motion Maintenance

1.2.1 Vertical Motion Check List

Check list for vertical motion components: chain, pulleys, motor, guide profile, limit switches.

1.2.2 General Maintenance Actions

General maintenance for vertical motion involves cleaning and lubricating the guide profile and chain.

1.2.3 Changing Vertical Motion Roller Chain

Steps for changing the vertical motion roller chain.

1.3 Turn Table Maintenance

1.3.1 Turn Table Check List

Check list for turn table components: chain, sprockets, motor, pulleys, bearings.

1.3.2 General Turn Table Maintenance Actions

General maintenance for turn table involves removing disc, vacuuming, and lubricating chain/rollers.

1.3.3 Removing Turn Table Disc and Cover Plate

Procedure for removing the turn table disc and cover plate for access.

1.3.4 Tensioning V-Belt and Roller Chain

Instructions for tensioning V-belts and roller chains using nuts and screws.

1.4 Load Stabilizer Maintenance

1.4.1 Load Stabilizer Check List

Check list for load stabilizer: press plate, limit switches, bushing, flange bearing, motor, chain, rollers.

1.4.2 General Load Stabilizer Maintenance Actions

General maintenance for load stabilizer: wipe dust, lubricate bushing/bearing, lubricate chain/sprockets, lubricate rollers.

1.4.3 Tensioning Load Stabilizer Roller Chain

How to tension the load stabilizer roller chain by turning a screw.

1.4.4 Changing Carriage Rollers, Chain, and Sprocket

Steps to change carriage rollers, chain, and sprocket.

ITW Mima ECOMAT PLUS Specifications

General

Model	ECOMAT PLUS
Manufacturer	ITW Mima
Category	Packaging equipment
Film Width	500 mm
Max Load Weight	2000 kg
Power Supply	50 Hz