To Next PageTo Next Page
Need help?Do you have a question about the ITW Mima Ecomat EASY and is the answer not in the manual?
General| Brand | ITW Mima |
|---|---|
| Model | Ecomat EASY |
| Category | Packaging equipment |
| Language | English |
Overview of the manual for solving machine malfunctions and common issues.
Explains different wrapping modes like Single, Splash proof, and Double.
How to select the number of bottom and top layers using arrow buttons.
Adjusts the time the film carriage moves up after reaching the pallet's upper edge.
How to adjust film tension by turning the adjusting nut, clockwise increases tension.
Details on overlapping degree based on turntable and carriage speed settings.
How to select the turntable speed, 0 for minimum, 10 for maximum.
How to select the film carriage speed, 0 for minimum, 10 for maximum.
Technical data and potentiometer settings for photocell, including sensing range and led indicators.
How to activate the Load Stabilizer for specific models by turning the selection switch.
Visual steps for different wrapping operations and film roll mounting.
Crucial safety precautions to follow before commencing any troubleshooting procedures.
Lists common 'No movement' problems and directs to specific pages for solutions.
Steps to resolve issues where the machine shows no movement and no display.
Steps to resolve no movement with horizontal bars appearing on the display.
Steps to resolve no movement with a normal display.
Addresses issues where the turntable runs continuously and the carriage doesn't rise.
Explains issues where the machine stops after making layers, and the carriage doesn't rise.
Troubleshoots when the machine stops after top layers and the carriage doesn't move down.
Addresses issues where the carriage goes to the upmost position during film reel change.
Solves problems where the carriage overruns the upper limiter during wrapping.
Discusses issues where the carriage rises partially and then stops.
Addresses carriage overrunning the pallet top with normal photocell delay.
Troubleshoots film breaking or the pallet not staying on the turntable.
Solves the problem where the carriage cannot reach its downmost reset position.
Instructions for manually driving the carriage upwards to remove obstacles.
Details the functions of LED indicators on the MPU-controller, including Load Stabilizer status.
Explains LED indicators on the Power Board for Ecomat Easy and Easy H models.
Provides links and information on how to find additional documentation and maintenance manuals online.
Lists supplementary documents or parameters available, such as inverter parameters.
Lists parameters for the ATV11 inverter (0.75kW) used for turntable rotation.
Details non-default parameter settings for the ATV11 inverter (0.75kW) for turntable rotation.
Illustrates the parameter setting flow for the ATV11 inverter (0.75kW) on the first page.
Illustrates the parameter setting flow for the ATV11 inverter (0.75kW) on the second page.
Lists parameters for the ATV11 inverter (0.18kW) used for film carriage up/down.
Details non-default parameter settings for the ATV11 inverter (0.18kW) for carriage up/down.
Illustrates the parameter setting flow for the ATV11 inverter (0.18kW) for carriage control.
Details common faults, their causes, and remedies for the starter not displaying faults.
