Diagraph - an ITW Company PA/4600 & PA/6000 User Manual
User Interface Page 35
User Interface
4.7 Power On/Off Screens
Map:
By pressing the Enter Standby button the unit goes offline and devices
on the switched 24 VDC supply are turned off. Once off, the screen will
transition to the next following screen for turning it back on. If this
screen is entered, but no selection is made within 10 seconds, the
screen will transition back to the offline home screen.
In this screen, the unit can be turned on by pressing the Power On
button. This resets the unit, and returns it to the offline state.
Screen Functionality
To Next Page
Loading...