Diagraph - an ITW Company PA/4600 & PA/6000 User Manual
Introduction Page 3
Introduction
• ATTENTION: Ne peut être utilissé dans une salle d’ordinateurs telle que
définie dans las norme. ANSI/NFPA 75 Standard for the Protection of Elec-
tronic Computer/ Data Processing Equipment
• This unit has been tested and found to comply with the limits for a Class A
device, pursuant to part 15 of the FCC Rules.
• This unit has been tested to comply with CE Standards.
• This unit is equipped with an Emergency Stop switch. Depressing this switch
will cause all machine operations to cease.
• This unit was tested and it was determined that a potential for tipping exists
in certain orientations. In compliance with UL safety standards, the stand
must be secured to the surface where it is located. Additionally, this type of
securing will result in greater product application accuracy.
1.3 Document Conventions
Formatting conventions are used throughout this manual as a method of providing consistency
for notes and warnings.
Goal:
This indicates a particular objective for the section.
Note:
This indicates that there is more information available for the in-depth reader.
.
1.4 Warranty Information
The PA/4600 and PA/6000 systems, including all components unless otherwise specified, carry a
limited warranty.
For all warranty terms and conditions, contact Diagraph, an ITW Company, for a complete copy
of the Limited Warranty Statement.
WARNING This symbol indicates a danger of injury to the user. Hazards are
identified by the exclamation mark in a triangle and bold italics text.
To Next Page
Loading...