ITW Diagraph PA/6000 - System Settings Screens

Diagraph - an ITW Company PA/4600 & PA/6000 User Manual
User Interface Page 27
User Interface
4.2 System Settings Screens
Map:
The system can be selected to Tamp, Tamp/Blow, or Blow. In addition,
there are selections for having a double apply for applications such as
Front Apply Swing Arms (FASA) or dual label per product. The choices
are:
• 1Tamp
Typical,1producttriggerto1tamp
• 1Tamp/Blow
1producttriggerto1tamp,withblowontheretraction
• 2Tamps
1producttriggerto2cyclesof tamp,eachcontrolledbya
separateproductdelaydistance
• 2Tamp/Blows
1producttriggerto2cyclesoftamp/blow,eachcontrolled
byaseparateproductdelaydistance
• 1Blow
1producttriggerto1blowonablowboxapplication
• 2Blows
1producttriggerto2blowsonablowboxapplication
Select the baud rate that matches the printer’s setting, which should
ultimately match the PC or similar device sending the label formats.
This is requested if the system is locked when a user attempts to enter
the Settings Menu. If the Passcode is set to “0000”, the Passcode is
disabled
Screen Functionality