41
The following functions are available:
– Copy programs
– Reset program to factory settings
– Select product logo
– Rename group name
– Rename program name
5.2.8 Pausing the active program
– Press STOP once to pause an active program (green LED flashes). Press the STOP key twice to completely stop the
program or press START to continue.
– If the program is paused, the display shows a flashing "Pause“ and the indicator changes back to the program screen.
– If a program is stopped prematurely, "Vacuum release" is displayed during the flooding of the firing chamber.
5.2.9 Changing the parameters while the program is running
Most of the parameters of the program, which have not yet been executed, can be changed while the program is paused.
Change the parameters as described in Chapter 5.2.3.
5. Operation and Configuration
5.3 Managing programs
Press the button [Admin] in the program view to open
the managing program menu.
To Next Page
Loading...
