Ivoclar Vivadent Programat P710 - Firing with an Individual Program

74
6. Practical Use
6.2 Firing with an individual program
Step 1:
Switching on
Switch on the furnace with the mains switch at the rear of the furnace.
The furnace conducts an automatic self-test.
Wait until the furnace has reached the set stand-by temperature.
Step 2:
Select the program
After the self-test, the display shows the home screen. Press the
[Individual programs] button.
Step 3:
Entering the parameters
Enter the individual parameters and create the desired firing program
(See Chapter 5.2.3 for details).
Select the desired program group
Select the desired program