5
Note
It is important as the user that you
read through this chapter.
Under no circumstances may the user
make settings that are designed for
the installer. This can cause serious
malfunction of the heat pump.
Important information
The heat pump Greenline HT Plus represents a new generation of heat
pumps from IVT Industrier. It contains numerous functions to control the
temperature and production of hot water in the house. The control unit
Rego 637 is the brains of the heat pump. Rego 637 includes a control and
monitoring function that stores important settings about the heat pump's
operation and maintenance. The settings are made by the installer and the
user via a control panel on the front of the heat pump. Settings intended
for the user, are presented under the headings Basic functions and Extra
functions.
When the heat pump has been installed and started there are a number of
points you should check regularly. This may concern an alarm triggering
or performing basic maintenance actions. First of all you should perform
these actions yourself. This manual describes each step in detail. If the
problem remains you should contact your dealer.
For the user
To Next Page
Loading...
Need help?
General
