WORMHOLE KM SWITCH
USER MANUAL
5
GETTING STARTED
Follow the below steps to configure the j5 Wormhole KM Switch
1. Connect one end of the Wormhole KM Switch to a standard USB
port on one of the two computers
2. Connect the other end of the Wormhole KM Switch to a USB port
on the second computer. (Please see below pictures)
3. The device will automatically start Wormhole KM Switch software
installation on both computers
4. Window might open “AutoPlay” options. Please Click on The option
“Run WKMLoader.exe”
To Next Page
Loading...
