MLO51206 - 10 -
3. Use your telephone to verify the functioning of the SIM card you are going to use
in Azor*. The card must have the PIN code disabled and there must be high
quality GSM coverage in the selected area.
4. Insert a SIM card into the GSM control unit* (B).
5. Secure the SIM card with the latch in the direction of the arrow* (C).
6. Connect the power adaptor (D).
7. Press the GSM control unit button (E) and hold it for about 2 seconds (Azor will
light up).
8. Wait until all three green LED indicators light up.
9. If any of the LED indicators fails to light up within 2 minutes, check what Azor
signals (see description in the manual beginning).
10. Secure the SIM card in the GSM control unit with the plastic cap (F) to avoid its
removal when you have finished the installation.
Tips and specifications
*) Only if Azor has no SIM card inserted upon delivery
To Next Page
Loading...
Need help?
General
