BASIC FUNCTIONS
MODE CONFIGURATIONS
Manual Changeover (
Auto Changeover
Heat Only
Cool Only
Auto
Manual Changeover
Auto Changeover
Heat Only
Cool Only
Auto
Your contractor can configure the thermostat with different mode selections based on
user preference and/or equipment type. Mode configuration can be as follows:
Heat / Cool / Off)
(Heat / Cool / Auto / Off)
(Heat / Off )
(Cool / Off)
(Auto / Off)
(Heat / Cool / *E. Heat / Off)
(Heat / Cool / Auto / *E. Heat / Off)
(Heat / *E. Heat / Off )
(Cool / Off)
(Auto / *E. Heat / Off
* Only displayed if thermostat has been configured for auxiliary heat.
Conventional Heating and Cooling Equipment
Heat Pump
7
To Next Page
Loading...
